Titan sprayers have gained immense popularity among both professionals and users because they are quite reliable and accurate. However, as with all the equipment, these should be used correctly to enhance their durability. One of the most pressing issues associated with Titan sprayers is the use of a sprayer tip. The sprayer tip is what defines the spray pattern, flow rates, and efficiency of your sprayer. Since Titan sprayer tips are more of a costly investment, below are expert suggestions that will help you realize their optimal usage while prolonging their durability.
Choose the Right Tip for the Job
The first step towards prolonging the life of your sprayer tip is to know how to select the right tip for your project. Titan sprayer tips are available in a variety of sizes and shapes to accommodate different coatings and applications. Misapplication of the tip will subject it to excessive damage, which will result in the tip failing sooner than expected. For instance, when using people’s severe coatings such as latex paint, a larger orifice size is required. On the other hand, for finer finishes like lacquers or stains, a smaller tip will suffice. It’s best to look at the manufacturer’s recommendations in order not to misuse a tip on the given material or surface.
Clean Your Tips Regularly
Most sprayer tip failures occur due to blocking of the spray tip or the sprayer itself. Paint and other materials can dry and harden within the tip’s structure and block the orifice, causing improper spray patterns. To avoid this, it is very important that after every use, the sprayer tips should be cleaned thoroughly and properly. To do this, begin by flushing the sprayer with the appropriate cleaning solution such as water for water-based paints or mineral spirits for oil-based paints. After flushing, detach the tip from the sprayer and place it in the cleaning liquid for some time. Use a bistoury to scoop the orifice of the sprayer tip, though no one should force you to put too much scratch on it.
Rotate Your Tips
Even with cleaning, the Titan tips are prone to damage and wear and tear due to the nature of the materials being sprayed. There are various methods of using the tips of the Titan sprayers and one of them is rotation. If for example painting a very large surface, before finishing the work change the tip if more than half of the job is remaining. Rotating the tips also helps to reduce the risks of one side being worn out faster than the other so it maintains the even spray and life of the tip.
Don’t apply too much pressure..
Although it may be appealing to apply more pressure on a sprayer to enhance the completion of the job, this will generally lead to the rapid wear and tear of the tips. The amount of pressure intake increases also increases the rate at which the material passes through the tip, leading to faster melting, hence tip wear. Se instead to the highest pressure that will still be able to give an even and uniform cover to the surface. This will help prevent further wear of the sprayer tips as well as ensure the quality of the finished surface.
Ensure Proper Storage of Your Tip
Storage of sprayer tips is also vital especially when it comes to the timely maintenance of the tips. Ensure your tips are dry before packing them in for storage and cleaning. Incomplete drying of the tip could result in internal dampness, which could either lead to acid corrosion or fungi growth which will destroy the tip. When not in use, keep your tips in a cool dry area; it is best to keep them in a screw-housed geared storage. If the sprayer is not used often, it is advisable to put a thin oily film on the tips to protect from rust.
Always Replace Worn Tips
Even if you take proper care of your sprayer tips, they will still wear out someday. Some of the tip wear signs include irregular spray patterns, lack of effectiveness, and the necessity to increase the pressure to get the results wanted. Using a worn-out tip for a long can create bigger disasters such as poorly coated surfaces, wastage of materials, and more pressure on the sprayer. Now and then, check and replace your tips if necessary to help maintain optimum efficiency and minimize the wear and tear of the sprayer’s components.
Invest in Good Quality Tips
Purchasing inexpensive, tips for my rx-80 could serve as an easy way of cutting back on some expenses, however, spending money on high caliber, OEM (Original Equipment Manufacturer) tips will be worth it in the long haul. Titan sprayer tips are designed for Titan sprayers which imply they will fit perfectly, perform well and last longer. Tips manufactured from high quality withstands wear and tear which promotes a consistent spray pattern over a long period. By replacing the tips with OEM tips, you are extending the life of the sprayer tips used on the chains and assisting in the most productive use of the chains on your projects.
Conclusion
To maximize the durability of your Titan sprayer tips, it is necessary to make the right choice with regard to the tips used, regularly maintain the equipment, and utilize it properly. Applying all these practical tips from the professionals, you will optimize the operation of your sprayer, minimize its downtime, and spare the budget for the new one. Professional painter or just a do it yourselfer, a good care of the tools will enable timely and perfect completion of the works whichever the case is.
